The vendor is gone. The developer left. The project file lived on a laptop that was wiped two refreshes ago. What you have is a zip that the LMS still accepts and a request to update six screens by the end of the month. How do you convert a SCORM package without source files and end up with a course you can actually maintain?

You recover it in layers: unzip a copy, read the manifest, pull out the text, media and quiz content, then rebuild what cannot be recovered in a modern tool. A published SCORM package is a folder of web files plus a manifest, so most of the content is sitting there in readable form. What is usually gone is the structure: layers, timings, object names and logic. Small text fixes can sometimes be made straight in the published files. Anything bigger is a conversion project, and you should plan for some rebuilding.

What Is Actually Inside a Published SCORM Package?

A folder of web files with a table of contents at the top. SCORM (the Sharable Content Object Reference Model) packaging rules say the manifest file, imsmanifest.xml, has to sit at the root of the package, and the zipped form is called a Package Interchange File. The SCORM content packaging overview also explains that everything the course needs should be inside the package and listed in the manifest.

How Do You Convert a SCORM Package When the Source Files Are Lost? – Recovering a Course From the Published Zip - 3D Animation

Unzip a typical package and you will see some mix of these:

  • imsmanifest.xml, plus a handful of schema files (.xsd or .dtd) that you never need to touch.
  • A launch page, often index.html, named in the manifest.
  • A player script bundle, usually minified JavaScript.
  • Data files (JSON, XML or JavaScript) that hold slide text, quiz content and settings.
  • Media folders with images, audio, video and fonts.

Each launchable unit is a SCO, a Sharable Content Object. The SCORM glossary describes SCOs as reusable chunks of training assembled through the manifest, each one a unit that communicates with the LMS. Most single courses contain one SCO, which keeps things simple.

Can You Edit a SCORM Course Without the Original Project File?

For tiny fixes, yes, carefully. To edit a published SCORM course, find the text in the data files, change it in a plain text editor, save, and re-zip. Typos, a changed phone extension, a renamed department: that kind of fix.

It gets risky fast. The same sentence may appear in three places (the screen, the accessibility text, the transcript), and you will only find two. Some tools publish text as images or vector shapes, so there is nothing to edit. Minified scripts break if you touch the wrong character. And there is the classic error that catches everyone at least once: zipping the parent folder instead of its contents, so the manifest ends up one level down and the LMS rejects the package.

My rule: if the change takes more than an afternoon of hand edits, stop editing and start converting. Hand-patched packages drift away from anything anyone can maintain, and the next person inherits a worse mystery than you did.

How Do You Pull Text, Media and Quiz Content Out of the Zip?

Methodically, starting from a copy. The original zip stays untouched in an archive folder, because sooner or later you will need to prove what the old version said.

  1. Unzip a working copy into a clean folder.
  2. Open imsmanifest.xml. Note the title, the SCORM version in the metadata, the launch file in the resource entry, and the list of files.
  3. Pick a distinctive phrase from screen three and search every file for it. Whichever file contains it is where the slide text lives.
  4. Copy the text out into a working document, screen by screen.
  5. Sort the media folders. Audio files often have names like a8f3c2.mp3, so play the course and match each file to its screen.
  6. Find the quiz data: question text, choices, correct answers and feedback. It is usually in the same data files as the slides.
  7. Take a screenshot of every screen and every branch as a visual reference.

Step two is quicker than it sounds. The parts of the manifest that matter for recovery look roughly like this in a SCORM 1.2 package (trimmed, with made-up names):

<metadata>
  <schema>ADL SCORM</schema>
  <schemaversion>1.2</schemaversion>
</metadata>
<organizations default="ORG-1">
  <organization identifier="ORG-1">
    <title>Forklift Safety Refresher</title>
    <item identifier="ITEM-1" identifierref="RES-1">
      <title>Forklift Safety Refresher</title>
    </item>
  </organization>
</organizations>
<resources>
  <resource identifier="RES-1" type="webcontent"
            adlcp:scormtype="sco" href="index.html">

The schemaversion tells you the SCORM version (a SCORM 2004 package says something like "2004 4th Edition" there). The href on the resource is the launch page. If the manifest also carries a mastery score on the item, write it down, because that is the pass mark the LMS has been using.

Playing the course in a browser with the developer tools open helps with step five. The network panel shows each media file load as you move through the slides, which makes matching quick.

Record everything you pull out in one place. If you have not already started a course asset inventory for this package, this is the moment, because you are about to create forty loose files with no memory of where they came from.

What Gets Lost When the Source Files Are Gone?

The parts that made the course editable. Publishing is a one-way trip from a project file built for humans to a folder built for browsers. Along the way, a lot gets flattened.

  • Layer and state structure becomes runtime data or disappears.
  • Object names turn into generated IDs.
  • Trigger logic and variables get compiled into script you cannot sensibly read.
  • Images are compressed and resized, so the crisp originals are gone.
  • Narration is compressed audio. The clean studio recording is not in the zip.
  • Fonts may be cut down to only the characters used.
  • Animation timings and cue points are hard to read back out.

Some things survive better than you might fear. Alt text, caption files and transcripts are often published as plain text, because the player needs them at runtime. Grab them while you are extracting slide copy. They are tedious to write from scratch, and finding them already done in the zip is one of the few pleasant surprises in this kind of work.

None of this means the course is dead. It means you know the content and you have lost the blueprint. Plan your estimate around that: the text and media are cheap to recover, the behaviour is not.

When You Convert a SCORM Package Without Source Files, Which Pieces Deserve a Rebuild?

Recover what is content, rebuild what is behaviour. That split covers most decisions.

PieceUsual callWhy
Screen text and transcriptsRecoverReadable in the data files
Quiz questions and feedbackRecover, then reviewContent survives; answer keys need checking
Images and diagramsRecover if sharp enoughPublished copies are compressed
NarrationReuse or re-recordDepends on quality and whether the script changed
Interactions and branchingRebuildThe logic is compiled
Tracking settingsRebuild and testMust be set up in the new tool

An importer can shorten the recovery half. AuthorLearn Studio can bring in some SCORM-published courses you own, along with their assets and layout, and it gives you an import report listing what was approximated. Results vary by package, so you still review every screen and fix what came in. If you want to see how one of your packages fares, the 30-day trial on the download page is a low-risk way to look around, though the trial cannot save, publish or export.

Whatever route you take, keep the screenshots from the recovery stage beside you. They are the yardstick for the new version.

How Do You Check the Recovered Course Still Reports Correctly?

Treat the old package as the reference and compare behaviour, not just looks. A rebuilt course that looks identical but reports differently will cause more trouble than one that looks a little different and reports the same.

Before you publish the new version, confirm these against the original:

  • The same SCORM version, unless you have a reason to change it and the LMS admin agrees.
  • The same completion rule (viewed all screens, passed the quiz, or both).
  • The same pass mark, and the same status sent on a pass and on a fail.
  • The score is sent in the same form.
  • Resume works: close halfway, relaunch, and land in the right place.

Run both versions in a SCORM test tool or an LMS sandbox and compare the data each one sends. Then talk to the LMS administrator before replacing the live course. Swapping a package can affect existing learner records in some systems, and they will know how theirs behaves.

Lost Source Files Are a Setback, Not a Death Sentence for the Course

Can you convert a SCORM package without source files? Yes, with your eyes open. The content is almost always recoverable, because a published package is just web files with a manifest. The structure is what you rebuild.

Start from a copy, read the manifest, extract text, media and quiz content into an organized folder, and rebuild the behaviour in a tool you can maintain. Then test the new version against the old one until they report the same way. The last step, the one nobody budgets for, is the most important: save the new source files somewhere that survives the next laptop refresh.